For Urgent Electrical Problems and Faults, We Offer Emergency Electrician Services 24 Hours a Day.
Call Now! 07782 805852
An RCD may react to sudden increases in electrical current or leakage current due to freezer or refrigerator contents thawing.
Occasionally, a poorly connected appliance can cause a spike in electricity supply. The RCD will trip if this happens and it will reset as it was designed. Shortly thereafter, electricity supply should return to normal.
Moisture from outside electrical boxes or sockets can cause the RCD to trip. It is essential to identify moisture in your socket box immediately. You should inspect exterior electrical socket boxes and outlets for moisture. Signs of moisture include weather-sealed boxes that have become brittle or reset switches that are not working correctly.
Spikes may also occur due to older appliances like dryers and washing machines that are not properly connected or maintained. In the case of motors or pumps, if surge frequency and time are correlated, then the RCD trip was most likely caused by the appliance.
When there is an abrupt spike in electricity, it can cause serious injury or damage. These spikes may be caused by lightning strikes and appliance electrical faults.
RCD trip could result from a malfunctioning component in your central heat. An RCD trip is often triggered when the faulty part turns on and off repeatedly, which may lead to false alarms. If you experience frequent or prolonged RCD-trips due to a malfunctioning component, your home could suffer permanent damage.
Maintaining an excellent standard of electrical safety is important. Schedule An Appointment With Gigi Emergency Electrician at 07782 805852 Your local emergency electrician serving Aston and Nechells, Lozells, Washwood Heath
Ohhhhh! The fuse box tripped again. You were in the middle of the game. It can be frustrating to have your fuse box keep tripping while you are playing. It is an indicator that something in your home might be defective. You could reset it each time it trips. Or you can identify the problem and fix the issue immediately.
Your fuse box (or, as electricians prefer to call it, your consumer unit) is usually located on the ground-floor if you live in house. If not, it will be under the stairs. Clear the area around the consumer unit so that it is easy to reach in an emergency. If you live alone, the unit will likely be higher up than a wall in your hallway.
A fusebox is essential to your safety. It’s like a gatekeeper between you, the mains electric supply, and any electrical currents entering your home.
These currents could prove fatally dangerous in the event of a fault, surge or other unusual activity. A fuse box detects any unusual activity and stops the flow of electricity if it reaches too high. If modern homes didn’t have circuit breakers and fuse boxes, electrical fires and electric shocks would be all too common.
If you open the fuse box panel, you will be able see if there are fuses or circuit breaks. Circuit breakers appear like a row of switches or levers. Fuses are more traditional. They’re round, and screw into sockets much like tiny light bulbs.
If you don’t have a label for your circuit breakers, fuses or switches, make sure to mark them according the location of which light sockets and lights they activate when they turn on. You’ll be a blessing to your future self if you ever have to replace a circuit.
A professional electrician must be called in if there is a major electrical problem. The most important thing to remember is to switch off and unplug whatever it is you need to work on so there’s no danger of a live current and call Gigi Emergency Electrician at 07782 805852 If you have fuse box problems in Nechells, Lozells, Washwood Heath, Birmingham, call Gigi Emergency Electrician today! 07782 805852
Miniature Circuit Breakers or MCBs are protective electromagnetic devices which act as switches in a circuit. They automatically open circuits when the current crossing the circuit exceeds a predetermined limit. The device can also be used as a normal on and off switch manually.
The MCBs, also known as time delay-tripping devices, trip the system when there is an excessive current flowing for a longer time or if the circuit is in danger. However, in the case of short-circuits, these devices can trip and stop the power supply within 2.5 milliseconds.
The condition of an electrical system that is characterized by “fault” refers to any situation that results from the malfunctioning or incorrect use of electricity. A fault can lead directly to an unsafe situation, such as explosions and fire, if it is not fixed promptly. The fault also continuously damages the system’s health, leading to high energy loss, increased thermal stress, and a decreased system health.
Faults can be dangerous to the system and must be fixed as soon as possible. This device is needed to not only clear the fault but also to reduce the opening time to minimize thermal stress.
The Miniature Circuit Breaker (MCB) is a protection device designed to protect against overload and/or short circuit. It includes a bimetal & a solenoid coil which trips the MCB in case of Overload & Short Circuit respectively. In accordance with IEC 600898-1, MCB will be used to reduce ratings below 0.5125A.
Thus, they are security devices that not only save electrical appliances or gadgets of your house but also the wiring and the entire house. So, whenever an MCB trips there is a serious reason behind it and should be dealt cautiously.
An electrical fire or short usually has a distinctive burning copper or metal smell. You might also smell rubber mixed in with plastic. It is not a laughing matter, as it can indicate that something has been too loaded. You should immediately turn off your main power supply and contact your electrician for assistance. They can let you know if the issue is serious and if you should contact the fire department.
Sometimes the electrical smell can be due to an electrical device you have plugged-in and not the system electrical itself.
It’s not easy to describe how it smells. The answer is a combination of all of the above You will never forget what it smells like. It’s a nightmare for an electrician.
The size of an electrical fire is dependent on its location. Copper and copper wires feed power through switches, plugs outlets, lights, TVs, televisions, and other devices. When they are damaged or overloaded with electricity (including insulation), they emit a distinctive scent.
Depending on their location in relation to one other, they can produce the same “burning Copper” smell or different smells due temperature difference.
Here are some possible causes of an electrical burning smell in the home.
1. Overload- when too much current passes through a circuit at the same time. It causes wires and cables to heat up and catch fire.
2. Short circuiting: When electricity gets stuck in a wire and flows into another, it can cause a shortcircuit that can lead to a fire.
3. Ground fault circuit interrupter (GFCI). These breakers detect if electricity is flowing into your home and shut it down.
4. Faulty wiring can be caused either by water, ice or someone tripping over your wire and creating a short-circuit that causes fire.
Electricity and fire are a dangerous combination. Home electrical fires are quite common. Electrical fires can happen in older homes with lots of outlets or extension cords.
If you detect a fishy smell, don’t hesitate calling Gigi Emergency Electrician or 07782 805852 as it could be dangerous.
Make sure that all of your cooking, grilling, and other heating appliances are turned off and are free of debris when the power goes out. If possible, turn off everything if you do not need it, as what was switched on will start working again when the power is restored, potentially leading to a fire or electric shock.
If your neighbors do not have power or street lights are out, a power cut is likely in your area.
For the latest information regarding power cuts, call 105. They should also be able to let you know when the power will be back on.
It is possible that your switches or fuses are faulty if your neighbors have power or street lights are still on.
Fix any faults with your appliances, fuse box, or wiring by getting a qualified electrician.
Whenever you have frequent power outages, or if a tripped fuse cuts power to your entire house, your circuit breaker may be malfunctioning. Even if the circuit breaker is designed to cut power in response to surges or other anomalies, frequent power outages could mean that something is wrong with it. A licensed electrician can locate the cause of the problem and fix it for you.
Most of the time we don’t have warning or the luxury of booking an appointment for help, but you can call your local emergency electrician.
Need An Electrician To Help You? - Out of Hours Electrician
Call Now! 07782 805852