24 Hour Emergency Electrician
Call Now! 07782 805852
If there is an abrupt rise in the use of electrical current or leakage, your RCD will react. This could be due to frozen contents or fridge thawing.
Sometimes, an appliance that is not properly connected can cause an unexpected spike in the electricity supply. If this happens, then the RCD will trip and restart as it is supposed to. The normal electricity supply should soon return to normal.
Moisture from outside electrical boxes or sockets can cause the RCD to trip. It is vital that you detect moisture in your socket box early on. External electrical terminal boxes and outlets must be checked periodically for moisture.
Spikes can also be the result of poorly maintained or incorrectly connected equipment such as older electrical appliances, such as washing machines and dryers, which can cause the power to surge. In the case of motors or pumps, if surge frequency and time are correlated, then the RCD trip was most likely caused by the appliance.
These trips can occur when there is an unexpected spike in electricity. This can cause damage or injury. These surges can be caused either by lightning strikes or electrical faults, as well as from appliances with motors or pumps.
RCD trips can be caused by a defective component in your central heating system. RCD trips are often caused by the defective part turning on and off repeatedly. This can lead to false alarms. Electrical equipment could sustain permanent damage if it experiences repeated or prolonged RCD trip due to a defective component.
It is essential to maintain a high level of electrical safety. Contact Gigi Emergency Electrician at 07782 805852 Your local emergency electrician serving Stirchley and Bournville, Kings Norton, Moseley B13 9, Selly Oak, Billesley, Springfield B13 9, Edgbaston
Ohhhhh! The fuse box tripped once more. You were in the middle of the game. If your fuse box keeps tripping even though you’re not sure why, it can be very frustrating. This is a sign that there might be a problem with your wiring or electrical appliances. It’s possible to reset it every time it trips. Or, you can find the culprit causing the problem and fix it once and for all.
If you live in a home, your fuse box, or consumer unit as electricians refer to it, is normally located on the ground floor, under the stairs. Clear the area around the consumer unit so that it is easy to reach in an emergency. If you live at the top of a block, your unit will usually be higher than the wall.
A fusebox is crucial to your safety. Think of it as the gatekeeper between yourself and all electrical currents coming into the home from the mains power supply.
These currents could be fatally dangerous if a fault or surge occurs, so the fuse box works by detecting any unusual activity and then cutting off the flow of electricity through that circuit if it gets too high. If modern homes didn’t have circuit breakers and fuse boxes, electrical fires and electric shocks would be all too common.
If you open the fuse box panel, you will be able see if there are fuses or circuit breaks. Circuit breakers look like a series of switches or levers. Fuses are more traditional. They’re round, and screw into sockets much like tiny light bulbs.
If you don’t have a label for your circuit breakers, fuses or switches, make sure to mark them according the location of which light sockets and lights they activate when they turn on. Your future self will thank you if a circuit ever breaks.
An electrician should be able to fix any electrical problems in your house. Remember to turn off and unplug everything you need to do so that there is no risk of live current. If you have fuse box problems in Bournville, Kings Norton, Moseley B13 9, Selly Oak, Billesley, call Gigi Emergency Electrician today! 07782 805852
Miniature Circuit Breakers or MCBs are protective electromagnetic devices which act as switches in a circuit. They automatically open the circuit whenever they sense the current passing over the circuit has crossed a certain limit or value. It can also be used manually as an on-off or normal switch.
These devices, also known by the time delay tripping device MCBs or time delay tripping systems, are designed to trip and turn off the system if there is overcurrent flowing for longer periods of time. If this happens, the whole circuit can be damaged. In the event of short-circuits these devices can trip and cut off the power supply within 2.5 milliseconds.
A fault is an electrical condition that arises from a malfunction of a component or improper electrical practice. A fault may lead to a very dangerous situation such as explosion & fire if not cleared timely, not only this, the amount of time for which fault remains in the system, it continuously deteriorates the system health causing high energy losses resulting in increased thermal stress upon the system.
Faults are hazardous to the system & require to be cleared at the earliest thus, there is a need for such a device which not only is capable of clearing the fault but also has a lower opening time in order to save the let-through energy & minimize the thermal stress.
A protection device called MCB (miniature circuit breaker) that offers protection against overload and short-circuit is the MCB. It includes a bimetal & a solenoid coil which trips the MCB in case of Overload & Short Circuit respectively. Complying with IEC 60898-1, MCB is used for the lower ratings from 0.5~125A.
These security devices not only save your electrical gadgets or appliances, but also protect the wiring throughout the house. There is a serious reason for an MCB to trip and it should be treated accordingly.
An electrical fire or short usually has a distinctive burning copper or metal smell. There may be a mixture of rubber and plastic that you can smell. This is not something to laugh at as it could indicate that your main power supply has been overload. It is a sign that something has gone wrong. They will inform you of the severity of the problem, and advise you if it is time to call the fire department.
Sometimes, an electrical smell could be caused by a device you have plugged and not your entire system.
Although it is difficult to describe what it actually smells like. The answer is a combination of all of the above Once you smell it you will never forget it. Ultimately, it’s an electrician’s worst nightmare.
You can have electrical fires in any size and location. Copper and metal wires make up the wiring that supplies power to devices such as outlets, switches and plugs. These wires emit a distinctive odor when they become damaged by heat, overloading, or other electrical stimuli (including damaged insulation).
Depending on where they are situated in relation one another, they could cause the same “burning-copper” odor. Or different smells due heat difference.
These are just a few reasons why you might notice an electrical burning scent in your house.
1. Overload- this is when too much current goes through a circuit at once, causing the wires to heat up and catch on fire.
2. Short circuiting- When electricity is trapped in one wire but flows into another wire it causes a short circuit, which can result in a fire.
3. Ground fault circuit interrupter (GFCI). These breakers detect if electricity is flowing into your home and shut it down.
4. Faulty Wiring- This could be caused by water, ice, or someone tripping over your cord.
The dangerous combination of fire and electricity is known as “electricity”. Electric fires are very common in houses. If you have an older home with many outlets or extension cords, electrical fires can be the result of these things being overloaded.
Should you notice a fishy or toxic electrical smell, please don’t hesitate in calling Gigi Emergency Electrician 07782 805852.
When the power is out, go around your house and check that your cookers, grills and other heating appliances are turned off and are cleared of debris. If possible, turn off everything if you do not need it, as what was switched on will start working again when the power is restored, potentially leading to a fire or electric shock.
The power might be out in your neighborhood if your neighbors don’t have power or the street lights are off.
The best way to get up-to-date information during a power outage is to call 105. The power company should also be able to tell you when the electricity will be restored.
It could be a fuse or switch issue if your neighbours still have power or the street lights are still on.
It’s best not to do the work yourself.
When your home experiences intermittent power outages or a blown fuse cuts power to the entire building, your circuit breaker could be at fault. Circuit breakers cut power when surges or anomalies are detected, but frequent outages could indicate that a problem exists with the device itself. An electrician can identify the problem’s root cause and fix it for you.
Many times, we do not get warning and there is no time to make an appointment, but you can trust your local emergency electrician.
Looking For An Electrician That Has Fast Response
Call Now! 07782 805852